Your shopping cart is empty!
All categories

Audio Technica ATW-1101 System 10 Beltpack Digital Wireless System

€289.00
Ex Tax: €234.96
rating: 0 reviews
   0 reviews    |     Write a review

Audio Technica ATW-1101 System 10 Beltpack Digital Wireless System

 

Audio-Technica’s System 10 is the most reliable digital high-fidelity wireless system of its generation. Designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Featuring stackable, contemporary styling, each configuration includes a mono ATW-R1100 receiver and an ATW-T1001 body-pack transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

 

Features:

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance

  • 2.4 GHz range – completely free from TV/ 3G interference

  • Three levels of diversity assurance: frequency, time, & space

  • Automatic frequency selection for seamless, interference-free operation

  • Automatic Frequency Selection. Plug & Play. Ease of use and reliability

  • Extremely easy operation with instantaneous channel selection, sync, and set-up

  • State-of-the-art digital receiver for reliable performance

  • Balanced XLR and unbalanced 1/4” output jacks with level control

 

Specifications:

  • Operating Frequencies: 2.4 GHz ISM band

  • Frequency Response: 20 Hz to 20 kHz Depending on microphone type

  • Operating Range: 30 m (100') Open range env. with no interfering signals

  • Dynamic Range: >109 dB (A-weighted), typical

  • Total Harmonic Distortion: <0.05% typical

  • Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures

  • Audio Sampling: 24 bit / 48 kHz

  • Latency: 3.8 ms

  • Receiver - Receiving System: Diversity (frequency/time/space)

  • Receiver - Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV

  • Receiver - Power Supply:100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external

  • Receiver - Dimensions: 190 mm W x 46.2 mm Hx 128.5 mm D

  • Receiver - Weight: 290g

  • Receiver - Accessories Included: Power supply

  • Belt Pack - RF Power Output: 10 mW

  • Belt Pack - Spurious Emissions: Following federal and national regulations

  • Belt Pack - Input Connections: Four-pin Locking Connector, 

  • Belt Pack - Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V

  • Belt Pack - Battery Type: Two 1.5V AA

  • Belt Pack - Battery Life: >7 hours (alkaline) Depending on batt. type & use pattern

  • Belt Pack - Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D

  • Belt Pack - Net Weight: 100g

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating:   Bad               Good

Enter the code in the box below:



View Mobile / Standard