myVolts Hot Tip Power Supply Tester / Polarity tester

New Hot

Description
Reviews

myVolts Hot Tip Power Supply Tester / Polarity tester

myVolts Hot Tip is a power supply tester - it lights up when you connect a working power supply to it.

Uh-oh. Something's not coming on - but is the plug or the device that's dodgy? It's easy to test a plug with the Hot Tip. Just plug the power supply into the wall, then connect it to the Hot Tip - the LED illuminates if there's power, so you'll know if your plug is good or bad.

The female end of Hot Tip accepts a standard 5.5mm outer diameter / 2.1mm inner diameter barrel tip - it's the commonest size, used on 98% of effects pedals, synths etc.

Power Passthrough:

Hot Tip doesn't get in the way of the power - you can power a device through it.

You can power a device without removing the Hot Tip from the PSU tip end - the LED draws almost no power, so you can go ahead and plug the tip end of Hot Tip into your device. That's handy for dark environments, like on a stage - or anytime you want to know and be sure there's power available. (The only works for gear that Hot Tip fits into, 5.5mm outer diameter and 2.1mm inner diameter - so if you're not sure, ask us).

Polarity Indicator LED:

Hot Tip illuminates BLUE for centre positive polarity, and RED for centre negative polarity.

Power supplies got mixed up, now you're not sure what polarity which PSU is? Hot Tip Has you covered.

There are no reviews for this product.